jerry's not fast from a rig, hasn't been for 20+ years now. He's the fastest at repeat hits and traverses to other targets, tho. His best time here is over .80 second. and he's not using a concealed rig, which IS what is being discussed here. A pocket draw and hit, by a fast man, up close, is well under .60 second. Jerry would have trouble cracking a full second for such, from concealment with belt rig.
Kel Tec P3AT. Prints like a cell phone. carry my wallet in my front left, CHL front right.
I rock a DeSantis holster, after Uncle Mike's split a seam and dumped my firearm on the floor of the veterinarian's exam room.
bend over and take it.
THIS is what real speed looks like, from an openly worn rig.
View: https://www.youtube.com/watch?v=13Yb1qqP9GI
A while back I ran into an obstacle to loading for my M1 Carbine: trimming brass. After some research, I found that Doug Giraud makes a trimmer case holder for .30 Carbine, but that led to another obstacle: how to hold the case. You see, the Giraud case holder is just a hollow insert. You hold the case with a Lee case trimmer shell holder for .30 Carbine. That would be really cumbersome.
Then I figured out that the RCBS hand primer tool (the kind that takes standard shell holders) could be used to hold the case while also providing (essentially) the same shell holder thickness as the Lee holders. Voila! I have a ton of brass ready to process, including trimming, once I finish a few other projects.
Then I figured out that the RCBS hand primer tool (the kind that takes standard shell holders) could be used to hold the case while also providing (essentially) the same shell holder thickness as the Lee holders. Voila! I have a ton of brass ready to process, including trimming, once I finish a few other projects.
M
member 3289
Guest
Well now you've hurt my feelings
View: https://www.youtube.com/watch?v=TuNSB9jkpyQ&t=16s
just 8 single hits. His traverses average .19 second, his repeat hits average .15 second. So you have to react, shoulder the shotgun, and get 8 hits, swinging across the targets as he did, in 2.0 seconds flat. He COULD be using a silenced .45 carbine. and get one hit each. None of them would have a clue where the shots came from and their buddies 100m away in the woods wouldn't hear a shot. They MIGHT hear their rifles clanging on their helmets as they fall, but even that would be inaudible at 200m. Which is why the shotgun is a loser as a combat weapon, basically, and as a foraging tool, too. If YOU need to forage, so will millions of other people, many of whom will shoot you on sight and it only takes ONE
M
member 3289
Guest
You're gonna shitpost yourself into another ban, aren't you?
amazing shit
only if management is as big a pussy as you are.
You've obviously never seen @Miesha's Taint when he pumps 12 and starts bucking them all.
M
member 3289
Guest
You can do better than insults
about half a second, or less.
WTF
Did Jon jones train with this master?
explains a lot
Did Jon jones train with this master?
explains a lot
for the first time. She was getting 3 shot groups under an inch, 50 ft, standing with a rest and about half that good standing unsupported. She started getting pretty cocky, so I had her try to react, raise it from low ready, and hit the head on a silohuette. She took about 4 seconds, many tries for the one shot each, and never touched it. I said it can be done very reliably in 1 second or less. She didn't believe it, until she saw it done 5 times in a row.
This airsoft timer is ok for use with ;22's, OUTDOORS, from a distance.
CED 7000A Airsoft Timer - Buy airsoft Accessories online from RedWolf Airsoft
normal timers can't pick up the little spitting noise of an airsoft shot, and air soft timer mikes are blown out by centerfire shots, even if you turn down the sensitivity all the way.
This airsoft timer is ok for use with ;22's, OUTDOORS, from a distance.
CED 7000A Airsoft Timer - Buy airsoft Accessories online from RedWolf Airsoft
normal timers can't pick up the little spitting noise of an airsoft shot, and air soft timer mikes are blown out by centerfire shots, even if you turn down the sensitivity all the way.
the chronograph will tell you. If you add .5 gr of powder at a time and dont see a corresponding increase in velocity, stop and back off by .5 grs. and do it in summer, not winter and do it with rapidfire 5 rds, really fast. Hot guns and hot weather increase pressures. So what's a safe max load in cold weather could give you a blown out casing in hot weather and rapidfire. The 10mm, 135 grs, over 1600 fps, has no need of more power. and the recoil of such loads is severe, in something as lw as a glock. like plus p 230 gr loads in an allloy commander. hurts your followup shot speed quite a bit, even if you're a top hand.
anyone who thinks that proper loads in a 9mm wont put them on their asses is a fool.
anyone who thinks that proper loads in a 9mm wont put them on their asses is a fool.
1
1372
Guest
I'd pump OP full of my creamy goodness.
1
1372
Guest
@theFLY~n~TACO sent me a snap chat last night of him pumping his goodness into some girl.He is a funny fucker
This forum is not shit. Some people that post here are though. Hint, hint.