Lifestyle Tractor Talk

Welcome to our Community
Wanting to join the rest of our members? Feel free to Sign Up today.
Sign up

sparkuri

Pulse on the finger of The Community
First 100
Jan 16, 2015
40,712
53,785
When bucket or grapple is full, keep the load as low to the ground as possible.
These aren't forklifts on level ground.

No matter what anyone tells you, you'll learn the hard way, lol. Just one high load on slightly uneven ground, try and make a turn, and you'll lift a rear wheel off the ground and scare the shit out of yourself. Happens quick.
I did test that a little yesterday with a pile of brush.
I took it high & did a few jerks to see if I could ollie.
 

MountainMedic

Rock Kicker
Sep 28, 2017
8,233
15,141
Also- start logging hrs & maintenance in a notebook now. You'll quickly lose track otherwise even though you're positive you'll remember. Make it a habit and be religious about it, if you do that thing will last longer than you do.
 

Dash Riprock

Member
Nov 21, 2023
15
23
You also have to be careful with a grapple when picking up downed trees with a rootball still attached. The uneven weight distribution can wrack the loader arms easier than one might think. The arms are stout up and down but not laterally.
 

Rambo John J

Baker Team
First 100
Jan 17, 2015
79,271
78,540
Lotta great advice.

The physics of it will have to be learned thru experience, then you get much better at anticipating the problems that physics will present for different jobs.

I only ran very old(Kubota) or basic new tractors though, never had my hands on something like what sparkuri @sparkuri has. Possibilities are endless.
 
Last edited:

Cornhole Champ

Formerly 'kvr28'
Nov 22, 2015
19,694
27,924
You also have to be careful with a grapple when picking up downed trees with a rootball still attached. The uneven weight distribution can wrack the loader arms easier than one might think. The arms are stout up and down but not laterally.
Good point, even a large taper can throw it off.
 

sparkuri

Pulse on the finger of The Community
First 100
Jan 16, 2015
40,712
53,785
still happy with it?
I am, bit have not used it at length yet, mainly for landscaping at the moment.
I still haven't figured out how to get my 3-point linkage attached after taking off the backhoe.
I might be missing some pins...
Can't find a single video on it, everything is about a quick hitch which I also have and need to attach.
 

Cornhole Champ

Formerly 'kvr28'
Nov 22, 2015
19,694
27,924
I am, bit have not used it at length yet, mainly for landscaping at the moment.
I still haven't figured out how to get my 3-point linkage attached after taking off the backhoe.
I might be missing some pins...
Can't find a single video on it, everything is about a quick hitch which I also have and need to attach.
If you are missing pins you can pick them up at tractor supply pretty cheap. Just make sure you get the right category. I would reach out to the dealership, they should be able to walk you through it.